. [OFB]
* Fixed indentation bug in ul/ol, removed some redundant styling. [OFB]
* Fixed validation errors in tests. [OFB]
* Changed IE stylesheet condition comment to include all versions of IE. [OFB]
* Started on a new approach for the PNG plugin. Will not be included in this release. [OFB]
* Fixed incorrect rendering of ol in IE6/7. [OFB]
* Created a new, spiffier sample page. [OFB]
Version 0.5 - August 28, 2007
--
* Changed grid width from 14 to 24 columns [OFB]
* Removed 'first' CSS class and the need to apply it to the first column in a row of columns. [OFB]
* Reverted to using pixels instead of em units to specify vertical spacing due to baseline issues with
all browsers except Firefox. [OFB]
* New set of default fonts. (Experimental) [OFB]
* Added test files [OFB]
Version 0.4 - August 11, 2007
--
* All font sizes and vertical margins are now elastic, through the use of em units.
Resizing works great in every tested browser. [OFB]
* Comes with a new, compressed version of BP, which reduces the size of the core files by 60 percent. [OFB]
* Support for incremental leading, contributed by Mark Boulton. [OFB]
* Adds perfected CSS buttons, by Kevin Hale of Particletree fame. [OFB]
* Fixes all known IE bugs. [OFB]
* Loads of minor fixes and additions. [OFB]
Version 0.3 - March 8, 2007
--
* Initial release of Blueprint (versions 0.1 and 0.2 were internal only).
PK x>\d.d blueprint/src/RESOURCES.txtnu W+A h1. Blueprint CSS Resources
Below are several resources for Blueprint CSS for you to use in your projects.
* Photoshop Fixed Width Template - https://github.com/joshuaclayton/blueprint-css/blob/master/templates/psd/fixed-width.psd
* Blueprint CSS Cheatsheet - http://www.garethjmsaunders.co.uk/blueprint/cheatsheets/index.html
* Blueprint CSS Placeholders - http://www.garethjmsaunders.co.uk/blueprint/placeholders/index.htmlPK x>\uKrR) R) blueprint/src/TUTORIAL.txtnu W+A h1. Blueprint CSS Framework Tutorial
Welcome to this tutorial on Blueprint. It will give you a thorough intro to what you can do with the framework, and a few notes on what you shouldn't do with it. Let's get started.
h2. About Blueprint
Blueprint is a CSS framework, designed to cut down on your development time. It gives you a solid foundation to build your CSS on top of, including some sensible default typography, a customizable grid, a print stylesheet and much more.
However, BP is not a silver bullet, and it's best suited for websites where each page may require its own design. Take a look at existing BP pages before deciding if the framework is right for you. You may also check out the test files in the @tests@ directory, which demonstrates most of the features in Blueprint.
The word "framework" may be a bit misleading in this context, since BP does not make suggestions on how you should organize or write your CSS. It's more like a "css toolbox" with helpful bits and pieces, from which you may pick and choose based on your needs.
h2. Structural Overview
From the bottom up, here are the CSS layers in Blueprint:
# *CSS reset*: Removes any default CSS rules set by each browser.
# *Typography*: Gives you some nice default typography and colors.
# *Grid*: Provides a set of CSS classes for making grid layouts.
The second part of Blueprint are the scripts, which let you customize most
aspects of the framework, from column count and widths, to output paths and
CSS class namespaces. We have two scripts:
# *Compressor*: For compressing and customizing the source files.
# *Validator*: For validating the Blueprint core files.
That's the quick overview, so now we can finally get into the details. First, we'll take
a look at the CSS in Blueprint. We'll then move on to the scripts, where I'll show you
how to customize the framework.
h2. Setting Up Blueprint
To use Blueprint, you must include three files in your HTML:
* @blueprint/screen.css@: All CSS for screen, projection viewing.
* @blueprint/print.css@: A basic stylesheet for printing.
* @blueprint/ie.css@: A few needed corrections for Internet Explorer
To include them, use the following HTML (make sure the href paths are correct):
Remember to add trailing slashes if you're using XHTML (" />").
h2. Using the CSS in Blueprint
As mentioned before, there's basically three layers of CSS in Blueprint. The first two layers, the browser CSS reset and the default typography, apply themselves by changing the CSS of standard HTML elements. In other words, you don't need to change anything in these files. If you, for instance, want to change the font size, do this in your own stylesheet, so that it's easy to upgrade Blueprint when new versions arrive.
h3. Classes for Typography
While the typography of Blueprint mainly applies itself, there's a few classes
provided. Here's a list of their names and what they do:
- @.small@
- Makes the text of this element smaller.
- @.large@
- Makes the text of this element larger.
- @.hide@
- Hides an element.
- @.quiet@
- Tones down the font color for this element.
- @.loud@
- Makes this elements text black.
- @.highlight@
- Adds a yellow background to the text.
- @.added@
- Adds green background to the text.
- @.removed@
- Adds red background to the text.
- @.first@
- Removes any left sided margin/padding from the element.
- @.last@
- Removes any right sided margin/padding from the element.
- @.top@
- Removes any top margin/padding from the element.
- @.bottom@
- Removes any bottom margin/padding from the element.
h3. Styling Forms
To make Blueprint style your input elements, each text input element should
have the class @.text@, or @.title@, where @.text@ is the normal size,
and @.title@ gives you an input field with larger text.
There's also a few classes you may use for success and error messages:
- @div.error@
- Creates an error box (red).
- @div.notice@
- Creates a box for notices (yellow).
- @div.success@
- Creates a box for success messages (green).
h3. Creating a Grid
The third layer is the grid CSS classes, which is the tool Blueprint gives you to create almost any kind of grid layout for your site. Keep in mind that most of the CSS behind the grid can be customized (explained below). In this section however, I'm using the default settings.
The default grid is made up of 24 columns, each spanning 30px, with a 10px margin between each column. The total width comes to 950px, which is a good width for 1024x768 resolution displays. If you're interested in a narrower design, see the section on customizing the grid, below.
So how do you set up a grid? By using classes provided by Blueprint. To create a column, make a new @
@, and apply one of the @.span-x@ classes to it. For instance, if you want a 3-column setup, with two narrow and one wide column, a header and a footer here's how you do it:
The header
The first column
The center column
The last column
The footer
In addition to the spans, there are two important classes you need to know about. First of all, every Blueprint site needs to be wrapped in a div with the class @.container@, which is usually placed right after the body tag.
Second, the last column in a row (which by default has 24 columns), needs the class @.last@ to remove its left hand margin. Note, however, that each @.span-24@ don't need the @.last@ class, since these always span the entire width of the page.
To create basic grids, this is all you need to know. The grid CSS however, provides many more classes for more intricate designs. To see some of them in action, check out the files in @tests/parts/@. These files demonstrate what's possible with the grid in Blueprint.
Here's a quick overview of the other classes you can use in to make your grid:
- @.append-x@
- Appends x number of empty columns after a column.
- @.prepend-x@
- Preppends x number of empty columns before a column.
- @.push-x@
- Pushes a column x columns to the left. Can be used to swap columns.
- @.pull-x@
- Pulls a column x columns to the right. Can be used to swap columns.
- @.border@
- Applies a border to the right side of the column.
- @.colborder@
- Appends one empty column, with a border down the middle.
- @.clear@
- Makes a column drop below a row, regardless of space.
- @.showgrid@
- Add to container or column to see the grid and baseline.
In this list, @x@ is a number from 1 through 23 for append/prepend and 1 through 24 for push/pull. These numbers will of course change if you set a new number of columns in the settings file.
Here's another example where we have four columns of equal width, with a border between the two first and the two last columns, as well as a four column gap in the middle:
The first column
The second column
The third column
The fourth (last) column
You may also nest columns to achieve the desired layout. Here's a setup where we want four rectangles with two on top and two below on the first half of the page, and one single column spanning the second half of the page:
Top left
Top right
Bottom left
Bottom right
Second half of page
Try this code in your browser it it's difficult to understand what it would look like. To see more examples on how to use these classes, check out @/tests/parts/grid.html@.
h2. The Scripts
Blueprint comes with two scripts: one for compressing and customizing the CSS, and one for validating the core CSS files, which is handy if you're making changes to these files.
h3. The Validator
The validator has a fairly simple job - validate the CSS in the core BP files. The script uses a bundled version of the W3C CSS validator to accomplish this. To run it, you'll need to have Ruby installed on your machine. You can then run the script like so: @$ ruby validate.rb@.
Note that there are a few validation errors shipping with Blueprint. These are known, and comes from a few CSS hacks needed to ensure consistent rendering across the vast browser field.
h3. The Compressor
As the files you'll include in your HTML are the compressed versions of the core CSS files, you'll have to recompress the core if you've made any changes. This is what the compressor script is for.
In addition this is where you customize the grid. To customize the grid, a special settings file is used, and the new CSS is generated once you run the compressor. The new compressed files will then reflect your settings file.
To recompress, you just have to run the script. This will parse the core CSS files and output new compressed files in the blueprint folder. As with the validator, Ruby has to be installed to use this script. In the @lib@ directory, run: @$ruby compress.rb@
Calling this file by itself will pull files from @blueprint/src@ and concatenate them into three files; @ie.css@, @print.css@, and @screen.css@. However, argument variables can be set to change how this works. Calling @$ruby compress.rb -h@ will reveal basic arguments you can pass to the script.
h3. Custom Settings
To learn how to use custom settings, read through the documentation within @lib/compress.rb@
PK x>\S S blueprint/src/README.txtnu W+A h1. Blueprint CSS Framework Readme
Welcome to Blueprint! This is a CSS framework designed to cut down on your CSS development time. It gives you a solid foundation to build your own CSS on. Here are some of the features BP provides out-of-the-box:
* An easily customizable grid
* Sensible default typography
* A typographic baseline
* Perfected browser CSS reset
* A stylesheet for printing
* Powerful scripts for customization
* Absolutely no bloat!
h2. Project Info
* *Web*: "http://blueprintcss.org":http://blueprintcss.org
* *Source*: "http://github.com/joshuaclayton/blueprint-css":http://github.com/joshuaclayton/blueprint-css
* *Wiki*: "http://github.com/joshuaclayton/blueprint-css/wikis/home":http://github.com/joshuaclayton/blueprint-css/wikis/home
* *Bug/Feature Tracking*: "http://blueprintcss.lighthouseapp.com":http://blueprintcss.lighthouseapp.com
h2. Setup Instructions
Here's how you set up Blueprint on your site.
# Upload the "blueprint" folder in this folder to your server, and place it in whatever folder you'd like. A good choice would be your CSS folder.
# Add the following three lines to every @@ of your site. Make sure the three @href@ paths are correct (here, BP is in my CSS folder):